EN Sole Flexing Tester | Bennewart Flexing Machine GT-KB06
Product Introduction
| Application:
This EN Sole Flexing Tester bennewart flexing machine is used to measure the flexing resistance of shoe soles under continuous movement. Before test, plunge some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length. Standards: |
Feature
Plunge some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length.
Bennewart Flex Tester Key Specifications
| Model | GT-KB06A | GT-KB06B |
| Test position | 3 | 6 |
| Control mode | Touch screen controlled | |
| Bending angle | 90±2 ° | |
| Bending speed | 125-150cpm | |
| Mandrel diameter | 30 mm | |
| Clamps apart | 110±1mm | |
| Movable fixture stroke | 41.5 ± 0.5 mm | |
| Counting | 0-9999999 | |
| Power supply | 1∮AC 220V 50/60HZ | |
| Dimensions | 105x42x60cm | 105x60x60cm |
| Weight | About 90kg | 160kg |
Accessories
| Standard accessories | 1set | Spanner |
| 1pcs | Chisel cutter(2mm) | |
| 1pcs | Power line |
Application Industry
All the material blow can be tested on the Bennewart Flex Tester EN Sole Flexing Tester
Đánh giá
Chưa có đánh giá nào.